TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 323 of 666
TM 9-2320-365-20-5 Change 2 20-491 (6) Remove two nuts (12), lockwashers (13), washers (14), cover (15), and two washers (14) from terminal block TB1 (16). Discard lockwasher. (7) Remove terminal lug TL22 (17) from terminal block TB1 connector 58 (18). (8) Remove terminal lug TL22 (19) from terminal block TB1 connector 58 (18). (9) Remove terminal lug (19) from existing wire J117 and digitization power cable. Discard terminal lug. (10) Strip insulation 5/16 (8 mm) on existing wire J119. (11) Install terminal lug (17) on existing wire J119. NOTE Perform step (7) on vehicles equipped with WTEC II transmission controllers. NOTE Perform step (8) on vehicles equipped with WTEC III transmission controllers. NOTE Perform steps (9) through (11) on vehicle serial numbers 00001 through 11347 equipped with WTEC III controls.