TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 211 of 666
TM 9-2320-365-20-5 20-63. BATTERY TO 200 AMP TERMINAL BLOCK 12 VDC CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Spare tire lowered (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Lockwasher (Item 89, Appendix G) a. Removal. (1) Loosen clamp (1) on turbocharger intake hose (2). (2) Remove turbocharger intake hose (2) from intake air cleaner boot (3). (3) Remove nut (4), lockwasher (5), washer (6), and terminal lug TL47 (7) from terminal block (8). Discard lockwasher. NOTE • Note routing of battery to 200 amp terminal block 12 vdc cable prior to removal. • Remove plastic cable ties as required. (4) Remove battery to 200 amp terminal block 12 vdc cable (9) from vehicle. 20-381