TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 164 of 666
TM 9-2320-365-20-5 20-55. 200 AMP ALTERNATOR KIT REMOVAL This task covers: a. Removal b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Spare tire lowered (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Vise, Machinist (Item 46, Appendix C) Caps, Vise Jaw (Item 4, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Lockwasher (2) (Item 66, Appendix G) Lockwasher (2) (Item 65, Appendix G) Nut, Self-Locking (2) (Item 139, Appendix G) Nut, Self-Locking (M1081) (2) (Item 140, Appendix G) Materials/Parts Washer, Spring (M1081) (2) (Item 280, Appendix G) Nut, Self-Locking (all models except M1081) (3) (Item 140, Appendix G) Lockwasher (8) (Item 92, Appendix G) Nut, Self-Locking (8) (Item 146, Appendix G) Lockwasher (2) (Item 101, Appendix G) Terminal, Lug (Item 265, Appendix G) Terminal, Lug (Item 264, Appendix G) Lockwasher (Item 98, Appendix G) Nut, Self-Locking (Item 130, Appendix G) Nut, Self-Locking (Item 131, Appendix G) Nut, Self-Locking (Item 129, Appendix G) Lockwasher (2) (Item 92, Appendix G) Personnel Required (2) a. Removal. (1) Loosen clamp (1) on air compressor intake hose (2). (2) Remove air compressor intake hose (2) from intake air cleaner boot (3). (3) Loosen clamp (4) on intake air cleaner boot (3). (4) Remove intake air cleaner boot (3) from intake air cleaner housing (5). 20-334 Change 1