TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 149 of 666
TM 9-2320-365-20-5 CAUTION Position both terminal blocks loosely on mounting bracket and align correctly before tightening nuts. Failure to comply may result in damage to equipment. (43) Position identification plate (58) and two terminal blocks (59) on bracket (60) with eight screws (61), washers (62), and self-locking nuts (63). (44) Tighten eight self-locking nuts (63) to 48 lb-in. (5 N·m). NOTE • Terminal blocks are not centered on bracket. Position bracket on spare tire retainer with exposed edge of ident-ification plate toward cab. • Step (45) requires the aid of an assistant. (45) Position bracket (60) on spare tire retainer (64) with four washers (65) and screws (66). (46) Tighten four screws (66) to 48 lb-in. (5 N·m). 20-319