TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 146 of 666
TM 9-2320-365-20-5 20-54. 200 AMP ALTERNATOR KIT INSTALLATION (CONT) WARNING 200 amp alternator weighs approximately 70 lbs (32 kgs). The aid of an assistant is required to install 200 amp alternator. Failure to comply may result in injury to personnel. NOTE Step (12) requires the aid of an assistant. (12) Position alternator (16) on alternator bracket (4) with washer (18), screw (19), and self-locking nut (20). (13) Position washer (21), screw (22), washer (23), and self- locking nut (24) on alternator (16). (14) Tighten self-locking nut (20) to 45-55 lb-ft (61-75 N·m). (14.1) Tighten self-locking nut (24) to 25-32 lb-ft (35-43 N·m). (15) Remove self-locking nut (25) and washer (26) from voltage regulator terminal (27). (16) Position terminal lug TL110 (28) on voltage regulator terminal (27) with washer (26) and self-locking nut (25). (17) Tighten self-locking nut (25) to 24 lb-in. (3 N·m). (18) Position dust boot (29) on terminal lug TL110 (28). 20-316 Change 1