TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 144 of 666
TM 9-2320-365-20-5 20-54. 200 AMP ALTERNATOR KIT INSTALLATION This task covers: a. Installation b. Follow-On Maintenance INITIAL SETUP Equipment Conditions 100 amp alternator removed (para 7-2). 100 amp reverse polarity relay removed (para 7-27). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Caps, Vise Jaw (Item 4, Appendix C) Vise, Machinist (Item 46, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (3) (Item 149, Appendix G) Nut, Self-Locking (Item 137, Appendix G) Nut, Self-Locking (M1081 only) (2) (Item 140, Appendix G) Washer, Spring (M1081 only) (2) (Item 280, Appendix G) Lockwasher (2) (Item 92, Appendix G) Personnel Required (2) a. Installation. NOTE Retain belt adjusting arm for future installation. (1) Remove two screws (1), lockwashers (2), and belt adjusting arm (3) from alternator bracket (4). Discard lockwashers. (2) Position belt adjusting arm (5) on alternator bracket (4) with two lockwashers (2) and screws (1). (3) Tighten two screws (1) to 25-32 lb-ft (35-43 N·m). (20-313 Blank)/20-314 Change 1