TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 110 of 666
TM 9-2320-365-20-5 20-256 Change 2 20-48. M1079 HEATER EMI SHIELDED FUEL PUMP REPLACEMENT This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Sealant, Pipe, Teflon (Item 58, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Materials/Parts (Cont) Lockwasher (2) (Item 83, Appendix G) Lockwasher (4) (Item 105, Appendix G) Lockwasher (2) (Item 106, Appendix G) Seal (Item 247.1, Appendix G) Seal (2) (Item 247.2, Appendix G) Seal (Item 247.3, Appendix G) Personnel Required (2) a. Removal. NOTE (1) Loosen two clamps (1) on hoses (2). (2) Remove two hoses (2) and clamps (1) from fitting (3) and 90 degree fitting (4). (3) Disconnect connector P310 (5) from EMI shielded fuel pump connector (6). (4) Remove two nuts (7), lockwashers (8), washers (9), screws (10), and EMI shielded fuel pump assembly (11) from subframe (12). Discard lockwashers. Tag hoses and connection points prior to removal. NOTE Steps (4) through (6) requires the aid of an assistant.