TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 745 of 968
TM 9-2320-365-20-4 19-13. HYDRAULIC RESERVOIR AND BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Hydraulic oil filter assembly removed (para 19-12). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench Set, Socket (Item 49, Appendix C) Container (30 gal (113 L) capacity) Materials/Parts Cap and Plug Set (Item 15, Appendix D) Packing, Preformed (2) (Item 164, Appendix G) Materials/Parts (Cont) Sealing Compound (Item 62, Appendix D) Oil, Lubricating, OE/HDO 10W (Item 44, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Nut, Self-Locking (Item 136, Appendix G) Nut, Self-Locking (4) (Item 140, Appendix G) Insulator, Tank (Item 52, Appendix G) Insulator, Tank (Item 53, Appendix G) Personnel Required (2) a. Removal. CAUTION Cap or plug hydraulic connections and connection points to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hoses and connection points prior to disconnecting. (1) Remove cap (1) from hydraulic reservoir (2). (2) Position container under drain plug (3). (3) Remove drain plug (3) from hydraulic reservoir (2) and drain oil. (4) Install drain plug (3) in hydraulic reservoir (2). (5) Install cap (1) on hydraulic reservoir (2). 19-61