TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 742 of 968
TM 9-2320-365-20-4 19-12. HYDRAULIC OIL FILTER ASSEMBLY SERVICE/REPLACEMENT This task covers: a. Service b. Removal c. Installation d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Filter Element, Fluid (Item 17, Appendix G) (Service) Seal, Plain (Item 255.1, Appendix G) (Service) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Packing, Preformed (2) (Item 162, Appendix G) Oil, Lubricating, OE/HDO 10W (Item 44, Appendix D) Tape, Antiseizing (Item 73, Appendix D) a. Service. (1) Remove hydraulic oil filter assembly bowl (1) from filter assembly base (2). (2) Remove fluid filter element (3) from oil filter assembly bowl (1). Discard fluid filter element. (3) Remove seal (4) from hydraulic oil filter assembly bowl (1). Discard seal. NOTE Apply lubricating oil to seal prior to installation. (4) Install seal (4) on hydraulic oil filter assembly bowl (1). (5) Install fluid filter element (3) in hydraulic oil filter assembly bowl (1). (6) Install hydraulic oil filter assembly bowl (1) on filter assembly base (2) and hand tighten. 19-58 Change 1