TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 73 of 968
TM 9-2320-365-20-4 Change 2 16-39 16-6. M1081 DOOR REPAIR/ADJUSTMENT This task covers: a. Window and Window Regulator Removal b. Window and Window Regulator Installation c. Door Latch/Lock Disassembly d. Door Latch/Lock Assembly e. Door Upper-Half Removal f. Door Upper-Half Installation g. Door Lower-Half Removal h. Door Lower-Half Installation i. Door Adjustment j. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Marker light removed (para 7-31). Upper door-half removed (for lower door-half removal only). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Screwdriver Attachment, Socket Wrench (Item 49, Appendix B) Tool Kit, Blind Rivet (Item 43, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Tools and Special Tools (Cont) Drill, Twist (Item 8, Appendix C) Goggles, Industrial (Item 15, Appendix B) Materials/Parts Sealing Compound (Item 61, Appendix D) Grease, Automotive and Artillery (GAA) (Item 23, Appendix D) Seal, Nonmetallic (Item 253, Appendix G) Soap, Laundry (Item 69, Appendix D) Rivet, Compression (12) (Item 237, Appendix G) Rivet (6) (P/N 20601-M4W2) Personnel Required (2) NOTE a. Window and Window Regulator Removal. NOTE (1) Remove cover (1) from door handle (2). (2) Remove screw (3), door handle (2), and washer (4) from door (5). (3) Remove four screws (6) and handle (7) from door (5). If complete repair of the door is required, it will be necessary to notify DS maintenance to replace the door side window at the completion of Unit level repairs. Left and right windows and window regulators are removed the same way. Right side shown.