TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 729 of 968
TM 9-2320-365-20-4 19-10. CAB HYDRAULIC CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C) Wrench Set, Socket (Item 48, Appendix C) Pan, Drain (Item 24, Appendix C) Sling, Endless (Item 32, Appendix C) Gloves, Rubber (Item 13, Appendix C) Goggles, Industrial (Item 15, Appendix C) Cab Support Tool (Item E-4, Appendix E) Materials/Parts Nipple, Tube (Item 35, Appendix D) Grease, Automotive and Artillery (GAA) (Item 23, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Pin, Cotter (Item 207, Appendix G) Nut, Self-Locking (Item 151, Appendix G) Pin, Cotter (Item 206, Appendix G) Washer, Spring (Item 274, Appendix G) Packing, Preformed (2) (Item 161, Appendix G) Washer, Spring (Item 282, Appendix G) Packing, Preformed (Item 167, Appendix G) Hydraulic Fluid A (Item 26, Appendix D) Personnel Required (2) a. Removal. (1) Position drain pan under cab hydraulic cylinder (1). WARNING Hydraulic fluid (MIL-H-5606) is TOXIC. Wear protective goggles and gloves; use only in well-ventilated area; avoid contact with skin, eyes, and clothes. Skin and clothing that come in contact with hydraulic oil should be washed immediately. Saturated clothing should be removed immediately. Failure to comply may result in injury to personnel. NOTE • Remove plastic cable ties as required. • Tag hoses and connection points prior to disconnecting. (2) Disconnect hoses (2 and 3) from 90-degree fittings (4 and 5). 19-45