TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 718 of 968
TM 9-2320-365-20-4 19-7. AIR TRANSPORTABILITY HYDRAULIC SYSTEM SERVICE (CONT) (52) Connect hydraulic hose (27) to fitting (29). (53) Connect air hose (25) to 90-degree fitting (26). (54) Remove dipstick (41) from air/hydraulic power unit (34). (55) Fill air/hydraulic power unit (34) to second groove from bottom on dipstick (Appendix H). (56) Install dipstick (41) in air/hydraulic power unit (34) and hand tighten. (57) Start engine and allow air system to pressurize (TM 9- 2320-365-10). NOTE Remove plug from end of hydraulic hose prior to performing step (58). (58) Raise and lower cab using hydraulic manifold (TM 9- 2320-365-10) until hydraulic fluid is cleared of foam, grit, and other contaminants. (59) Repeat steps (54) through (56) as required. (60) Connect hydraulic hose (28) to fitting (30). 19-34