TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download

Page 709 of 968

TM 9-2320-365-20-4 b. Installation. (1) Install 90-degree fitting (1) in hydraulic latch (2). (2) Install hydraulic latch (2) on cab support assembly (3) with four screws (4), washers (5), and self-locking nuts (6). (3) Connect hydraulic hose (7) to 90-degree fitting (1). c. Adjustment. (1) Loosen four nuts (1) on hydraulic latch (2). NOTE Perform step (2) and note position of cab latching hook assembly when it is near hydraulic latch. (2) Lower cab (TM 9-2320-365-10). (3) Raise cab (TM 9-2320-365-10). (4) Position hydraulic latch (2) to engage cab latching hook assembly (3). (5) Tighten four self-locking nuts (1) to 34-44 lb-ft (46-60 N·m). (6) Lower cab (TM 9-2320-365-10). (7) Check cab latching hook assembly (3) for proper operation. (8) Perform steps (1) through (7), as required. Change 1 19-25