TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 706 of 968
TM 9-2320-365-20-4 19-5. HYDRAULIC MANIFOLD FILTER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Gloves, Rubber (Item 13, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Filter Assembly (2) (Item 12, Appendix G) Hydraulic Fluid A (Item 26, Appendix D) a. Removal. WARNING Hydraulic fluid (MIL-L-5606) is TOXIC. Wear protective goggles and gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes. Skin and clothing that come in contact with hydraulic oil should be washed immediately. Saturated clothing should be removed immediately. Failure to comply may result in injury to personnel. (1) Remove two plugs (1) from hydraulic manifold (2). (2) Remove two preformed packings (3) from plugs (1). Discard preformed packings and plugs. (3) Remove two retainers (4), filters (5), and springs (6) from hydraulic manifold (2). Discard retainers, filters, and springs. 19-22