TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 70 of 968
TM 9-2320-365-20-4 16-36 Change 1 16-5. DOOR REPAIR/ADJUSTMENT (ALL MODELS EXCEPT M1081) (CONT) (15) Position mirror assembly (19) on door (7) with four screws (20). (16) Tighten four screws (20) to 84-96 lb-in. (9-11 N•m). g. Door Adjustment. (1) Support door (1) and loosen six screws (2) on bottom hinge (3) and top hinge (4). (2) Adjust door (1) so that gap between door (1) and cab is approximately equal all around. (3) Open, close, and open door (1) to ensure correct operation. (4) Tighten six screws (2) on top hinge (4) and bottom hinge (3) to 22-26 lb-ft (30-35 N•m). NOTE • Steps (1) through (4) require the aid of an assistant. • Loosen door hinge screws only enough to allow small adjusting movements of door NOTE • Steps (1) through (4) require the aid of an assistant. • Loosen door hinge screws only enough to allow small adjusting movements of door