TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 665 of 968
TM 9-2320-365-20-4 19-3. AIR/HYDRAULIC POWER UNIT AND BRACKET REPLACEMENT/REPAIR This task covers: a. Air/Hydraulic Power Unit Removal b. Air/Hydraulic Power Unit Disassembly c. Air/Hydraulic Power Unit Cleaning/Inspection d. Air/Hydraulic Power Unit Assembly e. Air/Hydraulic Power Unit Installation f. Bracket Removal g. Bracket Installation h. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Spare tire lowered (TM 9-2320-365-10). M13 decontamination unit removed, if equipped (TM 3- 4230-214-12&P). Air springs deflated (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Wrench Set, Socket (Item 47, Appendix C) Pan, Drain (Item 24, Appendix C) Gloves, Rubber (Item 13, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Cap and Plug Set (Item 15, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Antiseize Compound (Item 63, Appendix D) Washer, Spring (4) (Item 279, Appendix G) Packing, Preformed (2) (Item 166, Appendix G) Nut, Self-Locking (4) (Item 149, Appendix G) Hydraulic Fluid A (Item 26, Appendix D) Materials/Parts (Cont) Gasket (Item 32, Appendix G) Packing, Preformed (2) (Item 168.1, Appendix G) Packing, Preformed (Item 184.1, Appendix G) Packing, Preformed (Item 174.2, Appendix G) Gasket (Item 26.1, Appendix G) Washer, Flat (2) (Item 271.1, Appendix G) Lockwasher (3) (101.2, Appendix G) Packing, Preformed (174.1, Appendix G) Packing, Preformed (2) (171.2, Appendix G) Retainer, Packing (2) (213.2, Appendix G) Retainer, Packing (2) (213.3, Appendix G) Rag, Wiping (Item 51, Appendix D) References TM 3-4230-214-12&P Change 1 19-5