TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 618 of 968
TM 9-2320-365-20-4 18-9. PERSONNEL HEATER REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions CTIS ECU removed (para 12-6). Auxiliary panel removed, if equipped (para 7-8). Kick panel removed (para 16-3). Tools and Special Tools Pan, Drain (Item 24, Appendix C) Goggles, Industrial (Item 15, Appendix C) Gloves, Rubber (Item 13, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Tool Kit, Blind Rivet (Item 43, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Materials/Parts Cap and Plug Set (Item 15, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Strap, Tiedown, Electrical Components (Item 71.1, Appendix D) Materials/Parts (Cont) Antifreeze, Ethylene Glycol, Permanent (Item 13, Appendix D) Rivet, Blind (12) (Item 236, Appendix G) Gasket (Item 31, Appendix G) Gasket (Item 38, Appendix G) Seal (Item 247, Appendix G) Gasket (Item 33, Appendix G) Gasket (Item 39, Appendix G) Gasket (2) (Item 34, Appendix G) Gasket (Item 35, Appendix G) Gasket (Item 36, Appendix G) Rag, Wiping (Item 51, Appendix D) Solvent, Dry Cleaning (Item 571 Appendix D) Soap, Laundry (Item 69, Appendix D) Gasket (3) (Item 41, Appendix G) Gasket (Item 37, Appendix G) Plastic Strip (Item 212, Appendix G) Nut, Self-Locking (6) (Item 156, Appendix G) Nut, Self-Locking (3) (vehicle serial numbers 0001 through 3696 equipped with original personnel heaters) (Item 156, Appendix G) Decal (Item 9, Appendix G) NOTE Perform steps (1) through (25) to remove personnel heater for access. a. Removal. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (1) Position drain pan under radiator draincock (1). (2) Open radiator draincock (1) and drain approximately 15- 20 qt (14-19 L) of coolant from radiator (2). (3) Close radiator draincock (1). 18-30 Change 1