TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download

Page 614 of 968

TM 9-2320-365-20-4 18-8. DEFROST COVER REPLACEMENT This task covers: a. Removal (All Models Except M1081) b. Installation (All Models Except M1081) c. M1081 Removal d. M1081 Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). M1081 cab roof removed (para 16-4). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Seal, Urethane Foam (86.75 in. (220.3 cm)) (Item 256, Appendix G) (all models except M1081) Materials/Parts (Cont) Seal, Urethane Foam (102.25 in. (259.7 cm)) (Item 258, Appendix G) (all models except M1081) Seal, Urethane Foam (36.25 in. (92.1 cm)) (Item 257, Appendix G) (M1081) Seal, Urethane Foam (37.5 in. (95.2 cm)) (Item 256, Appendix G) (M1081) Personnel Required (2) a. Removal (All Models Except M1081). (1) Remove six screws (1), washers (2), and defrost cover (3) from dashboard (4). (2) Remove six clip nuts (5) from dashboard (4). NOTE Note position of seals prior to removal. (3) Remove seals (6 and 7) and two seals (8) from defrost cover (3). Discard seals. (4) Remove two seals (9) from defrost cover (3). Discard seals. 18-26