Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download

Page 611 of 968

TM 9-2320-365-20-4 Change 2 18-24.5 (10) Position clamp (21) on mirror arm (7). (11) Install washer (22) and convex mirror (23) with washer (22) and nut (24). (12) Position upper bracket (25) and lower bracket (26) on cab (27) with four washers (28) and screws (29). (13) Tighten four screws (29) to 80-98 lb-in. (9-11 N•m). (14) Position clip (30) and mirror (31) on lower bracket (26) with screw (32), washer (33), and self-locking nut (34). (15) Tighten self-locking nut (34) to 21-27 lb-ft (28-37 Nm). NOTE • Perform steps (12) through (24) on vehicles equipped with convex mirrors mounted with brackets. • Left and right cab mirrors are installed the same way. Left side shown.