Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download

Page 605 of 968

TM 9-2320-365-20-4 Change 2 18-23 18-7. CAB MIRROR REPLACEMENT This task covers: a.Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Tools and Special Tools (Cont) Screwdriver Attachment, Socket Wrench (Item 43, Appendix B) Materials/Parts Nut, Self-Locking (2) (Item 148, Appendix G) Nut, Self-Locking (2) (Item 128, Appendix G) Lockwasher (Item 101.3, Appendix G) a. Removal. (1) Remove nut (1), washer (2), convex mirror (3), and washer (2) from bracket (4). (2) Remove self-locking nut (5), washer (6), and bracket (4) from cab mirror (7). Discard self-locking nut. (3) Remove self-locking nut (8), washer (9), and cab mirror (7) from mirror arm (10). Discard self-locking nut. NOTE • Left and right cab mirrors are removed the same way. Left side shown. • Perform steps (1) and (7) convex mirror mounted with bracket.