TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 598 of 968
TM 9-2320-365-20-4 18-5. WINDSHIELD WIPER LINKAGE REPLACEMENT (CONT) (8) Position windshield wiper linkage (3) to full left position. NOTE Wiper arm should be in a straight line with windshield wiper linkage prior to installing on wiper motor. (9) Position wiper arm (11) on wiper motor (12) with washer (13) and self-locking nut (14). (10) Tighten self-locking nut (14) to 20-26 lb-ft (27-35 N·m). (11) Install PDP (15) on dashboard (4) with three screws (16). (12) Install three washers (17) and screws (18) in PDP (15). (13) Install three rubber washers (19), washers (20), nuts (21), and collars (22) on wiper shafts (23). 18-16