TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 591 of 968
TM 9-2320-365-20-4 18-4. WINDSHIELD WIPER MOTOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). PDP cover removed (para 16-2). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque 0-200 lb-in. (Item 58, Appendix C) Wrench, Torque 0-175 lb-ft (Item 57, Appendix C) Wrench Set, Socket (Item 49, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (Item 153, Appendix G) a. Removal. (1) Remove three screws (1) and washers (2) from PDP (3). (2) Remove three screws (4) from PDP (3). (3) Lift PDP (3) outward to gain access. NOTE Remove plastic cable ties as required. (4) Disconnect connector PX22 (5) from wiper motor (6). (5) Remove self-locking nut (7) and washer (8) from wiper motor (6). Discard self-locking nut. NOTE Note orientation of wiper arm prior to removal. (6) Remove wiper arm (9) from wiper motor (6). 18-9