TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 588 of 968
TM 9-2320-365-20-4 18-3. WINDSHIELD WIPER AND NOZZLE REPLACEMENT This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Washer, Spring (Item 279, Appendix G) Wiper, Refill (Item 283, Appendix G) a. Removal. NOTE All windshield wipers are removed the same way. Left side shown. (1) Disconnect windshield washer hose (1) from fitting (2). (2) Lift cover (3) at base of wiper arm (4). (3) Remove nut (5) and spring washer (6) from wiper arm shaft (7). Discard spring washer. NOTE Mark position of wiper arm prior to removal. (4) Remove wiper arm (4) from wiper arm shaft (7). 18-6 Change 1