TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 584 of 968
TM 9-2320-365-20-4 Section II. MAINTENANCE PROCEDURES 18-2. WINDSHIELD WASHER RESERVOIR AND PUMP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Cleaning Compound, Windshield (Item 16, Appendix D) Grommet, Nonmetallic (Item 47, Appendix G) a. Removal. (1) Turn screw (1) to the left to unlock cab step tread (2). (2) Remove two nuts (3), washers (4), and screw (5) from cab step tread (2). NOTE Screw will remain attached to cab step. (3) Remove cab step tread (2) from screw (6). (4) Remove strap (7) from two brackets (8). (5) Disconnect connector J25 (9) from connector P25 (10). (6) Disconnect connector P125 (11) from windshield washer pump (12). 18-2