Sign up to sell your inventory with NSN Lookup

TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download

Page 580 of 968

TM 9-2320-365-20-4 17-7. 11K SELF-RECOVERY WINCH (SRW) HOSES REPLACEMENT This task covers: a. Hydraulic Hose Locations b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shutdown (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Pan, Drain (Item 24, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C) Crowfoot Attachment, Socket Wrench (Item 10, Appendix B) Tools and Special Tools (Cont) Crowfoot Attachment, Socket Wrench (Item 12, Appendix B) Crowfoot Attachment, Socket Wrench (Item 11, Appendix B) Materials/Parts Cap and Plug Set (Item 15, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Oil, Lubricating, OE/HDO 10 (Item 43, Appendix D) a. Hydraulic Hose Locations. WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing should be removed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to a minimum. Failure to comply may result in injury to personnel. CAUTION Cap or plug hoses and connection points to prevent contamination of 11K SRW hydraulic system. Failure to comply may result in damage to equipment. NOTE • Refer to Table 17-1. 11K Self-Recovery Winch (SRW) Hydraulic Hose Locations for locations of hydraulic hoses on the 11K SRW. It may not be necessary to remove all hydraulic hoses at one time. • Tag hoses and connection points prior to removal. • Remove plastic cable ties as required. • Remove clamps and support brackets as required. • Position drain pan to collect oil. 17-28 Change 1