TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 578 of 968
TM 9-2320-365-20-4 17-6. WINCH CONTROL VALVE ASSEMBLY AND BRACKET REPLACEMENT (CONT) (5) Position winch control valve (3) on right frame rail (7) with three washers (8), screws (9), and nuts (10). (6) Position washer (11) and terminal lug TL320 (12) on winch control valve (3) with washer (13) screw (14), and nut (15). (7) Tighten three nuts (10) and nut (15) to 20-24 lb-ft (27-33 N·m). NOTE Install plastic cable ties as required. (8) Connect connectors L5 (16) and L4 (17) to winch control valve (3). (9) Tighten two captive screws (18) in connectors L5 (16) and L4 (17). (10) Install five hoses (19) on winch control valve (3). 17-26