TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 575 of 968
TM 9-2320-365-20-4 17-6. WINCH CONTROL VALVE ASSEMBLY AND BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Pan, Drain (Item 24, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Cap and Plug Set (Item 15, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Packing, Preformed (5) (Item 159, Appendix G) Ties, Cable, Plastic (Item 76, Appendix D) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal CAUTION Cap or plug hoses and connection points to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE • Remove plastic cable ties as required. • Tag hoses and connection points prior to disconnecting. (1) Disconnect five hoses (1) from winch control valve (2). 17-23