TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 569 of 968
TM 9-2320-365-20-4 Change 2 17-20.1 c. Spelter Socket Installation. (1) Match mark 2.5 in (63.5 mm) down from end of cable (1). (2) Wrap wire (2) around cable (1) at match mark until 1 in. (25 mm) wide coil of wire is placed on cable. (3) Remove tape from end of cable (1). (4) Separate strands of wire (3) at end of cable (1) until wire reaches top edge of wrapped wire (2). (5) Fan separated wires (3) evenly on end of cable (1). CAUTION Cut out any fibers or plastic materials in separate strands of wire. Failure to comply may result in inability of resin to bound to cable end.