TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 563 of 968
TM 9-2320-365-20-4 17-4. 11K SELF-RECOVERY WINCH (SRW) CABLE PULLEYS REPLACEMENT This task covers: a. Front Pulley Removal b. Front Pulley Installation c. Rear Pulley Removal d. Rear Pulley Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). 11K SRW cable extended approximately 3 ft (TM 9- 2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Tools and Special Tools Hammer, Hand (Item 17, Appendix C) Gloves, Welder’s (Item 14, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Nut, Self-Locking (2) (Item 134, Appendix G) Nut, Self-Locking (2) (Item 149, Appendix G) WARNING Cable can become frayed or contain broken wires. Frayed or broken wires can injure hands. Wear heavy leather-palmed work gloves when handling cable. Failure to comply may result in injury to personnel. a. Front Pulley Removal. (1) Remove 11K SRW cable (1) from front cable pulley (2). (2) Remove nut (3), washer (4), and cable pulley (2) from mounting bracket (5). (3) Remove two screws (6), self-locking nuts (7), and brackets (8) from mounting bracket (5). Discard self- locking nuts. 17-15