TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 550 of 968
TM 9-2320-365-20-4 Section II. MAINTENANCE PROCEDURES 17-2. 11K SELF-RECOVERY WINCH (SRW) FRONT ROLLER FAIRLEAD REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Front bumper and gravel deflector removed (para 14-2). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Gun, Lubricating (Item 16, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Grease, Automotive and Artillery (GAA) (Item 23, Appendix D) Pin, Spring (2) (Item 210, Appendix G) Pin, Spring (Item 211, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Remove two lubrication fittings (1) from straight shafts (2 and 3). (2) Remove retaining pin (4) from straight shaft (2). CAUTION Use a brass punch to remove straight shafts. Failure to comply may damage threads for lubrication fittings. (3) Remove straight shaft (2) and roller fairlead (5) from bracket (6). 17-2