TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 532 of 968
TM 9-2320-365-20-4 16-73. M1079 VAN PREPARATION FOR AIR TRANSPORT This task covers: a. Preparation b. Recovery INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). WARNING • Heavy objects/loads, such as tool boxes and heavy parts, must always be carried on the floor with the weight distributed as equally as possible between left and right sides of M1079 van. Failure to comply decreases the stability of the M1079 van and will increase the likelihood of a rollover. • Heavy cabinets must always be mounted as low as possible with the weight distributed as equally as possible between left and right sides of M1079 van. Remember to consider the weight of the items that will be stored in the cabinets. Failure to comply decreases the stability of the M1079 van and will increase the likelihood of a rollover. • Always keep in mind, when placing items inside the M1079 van, that heavier items must always be positioned as low as possible and the weight distributed as equally as possible between left and right sides of M1079 van. Failure to comply decreases the stability of the M1079 van and will increase the likelihood of a rollover. a. Preparation. CAUTION PRIOR TO SHIPMENT BY RAIL, PROPERLY STOW, TIE DOWN, AND OR BRACE ALL LOOSE ITEMS AND OTHER ITEMS INSIDE THE VAN. Failure to comply may result in damage to equipment. NOTE All four blackout shields are closed the same way. Right side front shield shown. (1) Raise and latch blackout shield (1) on van window (2). 16-484