TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 524 of 968
TM 9-2320-365-20-4 16-71. M1079 12/24 VDC POWER ENTRY CONNECTOR REPLACEMENT (CONT) NOTE • All wires on 12/24 vdc power entry connector are removed the same way. One wire shown. • Tag wires and connection points prior to disconnecting. • Refer to Table 16-9. M1079 Connector J173 Pin Letters and Wire Numbers for details. (7) Remove wire (15) from 12/24 vdc power entry connector J173 pin (16). (8) Remove insulation sleeving (17) from wire (15). (9) Perform steps (7) and (8) on remaining wires. (10) Remove gasket (14) from 12/24 vdc power entry connector J173 (7). Discard gasket. Table 16-9. M1079 Connector J173 Pin Letters and Wire Numbers PIN LETTER A B C D E F G H WIRE NUMBER 2010 3086 2040 3086 UNUSED 2006 1507 1507 b. Installation. NOTE • All wires on 12/24 vdc power entry connector are installed the same way. One wire shown. • Refer to Table 16-9. M1079 Connector J173 Pin Letters and Wire Numbers for details. (1) Position gasket (1) on 12/24 vdc power entry connector J173 (2). (2) Position insulation sleeving (3) on wire (4). (3) Remove approximately 1/4 in. (0.6 cm) of insulation from wire (4). (4) Solder wire (4) to 12/24 vdc power entry connector J173 pin (5). (5) Shrink insulation sleeving (3) on wire (4) and 12/24 vdc power entry connector J173 pin (5). 16-476