TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download

Page 522 of 968

TM 9-2320-365-20-4 16-71. M1079 12/24 VDC POWER ENTRY CONNECTOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions AC power disconnected (TM 9-2320-365-10). Batteries disconnected (para 7-48). LH and RH doors opened (115 degrees) (TM 9- 2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Heater, Gun Type, Electric (Item 20, Appendix B) Soldering Iron, Electric (Item 72, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Insulation Sleeving, Electrical (Item 31, Appendix D) Solder, Tin Alloy (Item 70, Appendix D) Sealing Compound (Item 67, Appendix D) Lockwasher (Item 79 Appendix G) Lockwasher (4) (van bodies serial number 191 and higher) (Item 77, Appendix G) Lockwasher (16) (van body serial numbers 001 through 190) (Item 77, Appendix G) Gasket (Item 29, Appendix G) Personnel Required (2) a. Removal. NOTE Perform step (1) on van body serial numbers 001 through 190. (1) Remove 16 screws (1), lockwashers (2), washers (3), and cover (4) from 12/24 vdc power entry panel (5). Discard lockwashers. 16-474