TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 497 of 968
TM 9-2320-365-20-4 16-68. M1079 110/208 VAC POWER IN/OUT CABLE REPLACEMENT This task covers: a. 110/208 VAC POWER IN Connector Removal b. 110/208 VAC POWER IN Connector Installation c. 110/208 VAC POWER OUT Connector Removal d. 110/208 VAC POWER OUT Connector Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Field telephone wires disconnected, if required, (TM 9-2320-365-10). AC power disconnected (TM 9-2320-365-10). Batteries disconnected (para 7-48). LH and RH door opened (115 degrees) (TM 9-2320- 365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Sealing Compound (Item 67, Appendix D) Lockwasher (16) (van bodies serial number 191 and higher) (Item 77, Appendix G) Lockwasher (28) (van body serial numbers 001 through 190) (Item 77, Appendix G) Lockwasher (8) (Item 78, Appendix G) Lockwasher (2) (Item 85, Appendix G) Personnel Required (2) a. 110/208 VAC POWER IN Connector Removal. NOTE Perform step (1) on van body serial numbers 001 through 190. (1) Remove 28 screws (1), lockwashers (2), washers (3), and cover (4) from 110/208 vac power entry panel (5). Discard lockwashers. 16-449