TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 492 of 968
TM 9-2320-365-20-4 16-67. M1079 FAN ASSEMBLY REPLACEMENT/REPAIR NOTE Install plastic cable ties as required. (2) Install fan assembly (2) in fan shroud (6) with four washers (7), lockwashers (8), and screws (9). (3) Install conduit connector (10) in fan shroud (6) with locknut (11). (4) Route wires 1499H, 415A, and 3085X (12, 13, and 14) through conduit connector (10). WARNING d. Installation. Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply sealing compound to van body wall (1). (2) Install four seals (2) on van body wall (1). (3) Install pipe nipple (3) on outlet box (4). (4) Install conduit elbow (5) on pipe nipple (3). (5) Position conduit nuts (6 and 7) and ferrules (8) on conduit (9). (6) Position conduit nut (6) and conduit (9) on conduit elbow (5). 16-444