TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 425 of 968
TM 9-2320-365-20-4 16-59. M1079 LIGHTING FIXTURE AND CONDUIT REPLACEMENT This task covers: a. Front Lighting Fixture Removal b. Front Lighting Fixture Installation c. Rear Lighting Fixture Removal d. Rear Lighting Fixture Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions AC power disconnected (TM 9-2320-365-10). Batteries disconnected (para 7-48). LH and RH doors opened (115 degrees) (TM 9-2320- 365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Personnel Required (2) WARNING Wear appropriate eye protection when handling fluorescent lamps. Failure to comply may result in injury to personnel. a. Front Lighting Fixture Removal. NOTE Left front lighting fixture DS82 and right front lighting fixture DS81 are removed the same way. Right front lighting fixture DS81 shown. (1) Remove diffuser (1) from lighting fixture DS81 (2). (2) Remove tube lock holder (3) from each end of two fluorescent lamps (4). (3) Remove two fluorescent lamps (4) from lighting fixture DS81 (2). (4) Remove ballast cover (5) from lighting fixture DS81 (2). 16-377