TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 421 of 968
TM 9-2320-365-20-4 16-58. M1079 BLACKOUT/EMERGENCY LIGHT REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions AC power disconnected (TM 9-2320-365-10). Batteries disconnected (para 7-48). LH and RH doors opened (115 degrees) (TM 9-2320- 365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Tool Kit, Blind Rivet (Item 43, Appendix C) Goggles, Industrial (Item 15, Appendix C) Tools and Special Tools (Cont) Drill, Portable, Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Materials/Parts Rivet, Blind (4) (Item 224, Appendix G) Lockwasher (12) (Item 76, Appendix G) Lockwasher (4) (for front emergency light) (Item 76, Appendix G) a. Removal. NOTE All blackout/emergency lights are removed the same way. Left side emergency light DS79 shown. (1) Remove four screws (1) and lens (2) from base (3). (2) Remove gasket (4) from base (3). (3) Remove lamp (5) from base (3). NOTE Perform step (4) on front raceway cover. (4) Remove two screws (6), lockwashers (7), and washers (8) from each end of raceway (9). Discard lockwashers. 16-373