TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 309 of 968
TM 9-2320-365-20-4 Table 16-1. M1079 Van Body Accessory Mounting Blind Rivet Nuts Part Number Thread Size Grip Range Drill Size Install Hole Size Min. Max. MS27130-47 5/16-18 UNC 0.350-0.425 Z 0.413 0.423 MS27130-53 5/16-24 UNF 0.350-0.425 Z 0.413 0.423 MS27130-59 3/8-16 UNC 0.370-0.455 12.5 mm 0.490 0.500 MS27130-65 3/8-24 UNF 0.370-0.455 12.5 mm 0.490 0.500 (1) Determine appropriate mounting location for accessory. Refer to Figure 16-1 through 16-6. M1079 Van Body Interior Accessory Mounting Hardpoints. WARNING Wear appropriate eye protection when drilling holes. Failure to comply may result in injury to personnel. (2) Drill pilot hole(s) for blind rivet nut(s). (3) Enlarge pilot hole(s) to correct size. Refer to Table 16-1. M1079 Van Body Accessory Mounting Blind Rivet Nuts. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. CAUTION Coat all blind rivet nuts with sealing compound prior to installation. Failure to comply may result in damage to equipment. (4) Coat blind rivet nut(s) with sealing compound. (5) Install blind rivet nut(s) in hole(s) enlarged in step (3). 16-261