TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 308 of 968
TM 9-2320-365-20-4 16-44. M1079 VAN BODY INTERIOR ACCESSORY MOUNTING LOCATIONS This task covers: a. Locating Hardpoints for Accessory Mounting b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). LH and RH doors opened (115 degrees) (TM 9-2320- 365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Drill Set, Twist (Item 6, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Tools and Special Tools (Cont) Goggles, Industrial (Item 15, Appendix C) Tape, Measuring (Item 40, Appendix C) Materials/Parts Sealing Compound (Item 67, Appendix D) WARNING • Heavy objects/loads, such as tool boxes and heavy parts, must always be carried on the floor with the weight distributed as equally as possible between left and right sides of M1079 Van. Failure to comply decreases the stability of the M1079 Van and will increase the likelihood of a rollover. • Heavy cabinets must always be mounted as low as possible with the weight distributed as equally as possible between left and right sides of M1079 Van. Remember to consider the weight of the items that will be stored in the cabinets. Failure to comply decreases the stability of the M1079 Van and will increase the likelihood of a rollover. • Always keep in mind, when placing items inside the M1079 Van, that heavier items must always be positioned as low as possible and the weight distributed as equally as possible between left and right sides of M1079 Van. Failure to comply decreases the stability of the M1079 Van and will increase the likelihood of a rollover. a. Locating Hardpoints for Accessory Mounting. CAUTION Accessories mounted in the interior of M1079 Van bodies must be positioned so that mounting fasteners are located in structural frame members. Failure to comply may result in damage to equipment. NOTE • This task shows only the hardpoints suitable for supporting mounted accessories. Refer to Figures 16-1 through 16-6. M1079 Van Body Interior Accessory Mounting Hardpoints for details. • The user is responsible for selecting the correct size and number of blind rivet nuts to be installed. Refer to Table 16-1. M1079 Van Body Accessory Mounting Blind Rivet Nuts for details. • Alternative blind rivet nuts, not listed in Table 16-1. M1079 Van Body Accessory Mounting Blind Rivet Nuts, may be used if the dimension 0.415 in. (1.05 cm) falls within their grip range and maximum hole size of 0.500 in. (1.27 cm) is not exceeded. 16-260