Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download

Page 306 of 968

TM 9-2320-365-20-4 16-43. M1079 VAN BODY FLOOR TAPPING PLATE INITIAL INSTALLATION (SERIAL NUMBERS 001 THROUGH 190) (CONT) NOTE Steps (24) and (25) require the aid of an assistant. (24) Remove tapping plates (22 and 23) from van body floor (2). (25) Remove tapping plates (20 and 21) from van body floor (2). WARNING Wear appropriate eye protection when drilling holes. Failure to comply may result in injury to personnel. (26) Drill pilot holes at locations marked in steps (20) and (22). (27) Enlarge pilot holes to 1/2 in. (1.27 cm). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. CAUTION Coat all rivet nuts with sealing compound prior to installation. Failure to comply may result in damage to equipment. (28) Apply sealing compound to 12 blind rivet nuts (24). (29) Install 12 blind rivet nuts (24) in van body floor (2). 16-258