TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 301 of 968
TM 9-2320-365-20-4 16-43. M1079 VAN BODY FLOOR TAPPING PLATE INITIAL INSTALLATION (SERIAL NUMBERS 001 THROUGH 190) This task covers: a. Floor Tapping Plate Initial Installation b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). LH and RH doors opened (115 degrees) (TM 9-2320- 365-10). Any loose equipment removed (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Drill Set, Twist (Item 6, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Tool Kit, Blind Rivet (Item 43, Appendix C) Materials/Parts Nut, Blind Rivet (26) (Item 111, Appendix G) Screw, Machine (26) (Item 240, Appendix G) Sealing Compound (Item 67, Appendix D) Personnel Required (2) a. Floor Tapping Plate Initial Installation. (1) Measure and mark a line (1) on van body floor (2) from van body front wall (3) to van body rear wall (4) 1/2 in. (1.25 cm) from van body left side wall (5). (2) Measure and mark a line (6) on van body floor (2) from van body front wall (3) to van body rear wall (4) 17-11/16 in. (44.9 cm) from van body left side wall (5). 16-253