TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 299 of 968
TM 9-2320-365-20-4 16-42. M1079 TAPPING PLATE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). LH and RH doors opened (115 degrees) (TM 9-2320- 365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Screwdriver Attachment, Socket Wrench (Item 42, Appendix B) Personnel Required (3) a. Removal. NOTE • Van bodies serial number 191 and higher are equipped with tapping plates on the floor and side walls for mounting accessory items. • Van body serial numbers 001 through 190 can be equipped with tapping plates on the floor for mounting accessory items. • Removal of floor tapping plates requires the aid of an assistant. • Removal of side wall tapping plates requires the aid of two assistants. • All tapping plates are attached by either three, four or five screws. Van body serial number 191 left side wall front tapping plate shown. Remove four screws (1) and tapping plate (2) from van body left side wall (3). 16-251