TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 290 of 968
TM 9-2320-365-20-4 16-39. M1079 WINDOW SASH ASSEMBLY REPLACEMENT (CONT) (12) Install four screws (15) in RH jamb sash (8). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (13) Apply adhesive completely around outside edge of glass (10). d. Installation. NOTE • Van body serial numbers 001 through 190 are equipped with five window sash assemblies 30 in. (760 mm) tall. Van bodies serial number 191 and higher are equipped with four window sash assemblies 14 in. (355 mm) tall. • All window sash assemblies are installed the same way. Left front window sash assembly on van body serial number 191 shown. • Perform step (1) on van bodies serial number 191 and higher. (1) Install two stud base fasteners (1) on window sash (2) with four rivets (3). 16-242