TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 279 of 968
TM 9-2320-365-20-4 d. Installation. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. CAUTION Coat all rivets with sealing compound prior to installation. Failure to comply may result in damage to equipment. NOTE • All blackout shields and frames are installed the same way. Left front blackout shield and frame on van body serial number 191 shown. • Perform steps (1) and (2) on van bodies serial number 191 and higher. (1) Apply sealing compound to 17 rivets (1). (2) Install blackout shield assembly (2) on van body wall (3) with 17 rivets (1). NOTE Perform steps (3) and (4) on van body serial numbers 001 through 190. (3) Apply sealing compound to 29 rivets (1). (4) Install blackout shield assembly (2) on van body wall (3) with 29 rivets (1). 16-231