TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 274 of 968
TM 9-2320-365-20-4 16-37. M1079 BLACKOUT SHIELD AND FRAME REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). LH and RH doors opened (115 degrees) (TM 9- 2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Drill, Portable, Electrical (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Goggles, Industrial (Item 15, Appendix C) Tool Kit, Blind Rivet (Item 43, Appendix C) Materials/Parts Lockwasher (2) (Item 77, Appendix G) Rivet, Blind (17) (van bodies serial number 191 and higher) (Item 218, Appendix G) Rivet, Blind (29) (van body serial numbers 001 through 190) (Item 218, Appendix G) Nut, Self-Locking (2) (Item 122, Appendix G) M1079 Blackout Shield Header Seal (Item E-6, Appendix E) M1079 Blackout Shield Jamb Seal (2) (Item E-6, Appendix E) Sealing Compound (Item 67, Appendix D) Seal, Weather (Item 259, Appendix G) Tape, Adhesive (Item 72, Appendix D) Adhesive (Item 5, Appendix D) a. Removal. NOTE All blackout shields and frames are removed the same way. Left front blackout shield and frame on van body serial number 191 shown. (1) Remove two screws (1), lockwashers (2), washers (3) and bracket (4) from van body wall (5). Discard lockwashers. 16-226