TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 232 of 968
TM 9-2320-365-20-4 16-34. M1079 LADDER, MOUNTING BRACKET, AND STOWAGE BRACKET REPLACEMENT/REPAIR This task covers: a. Ladder Mounting Bracket Removal b. Ladder Mounting Bracket Installation c. Ladder Stowage Bracket Removal d. Ladder Stowage Bracket Installation e. Ladder Disassembly f. Ladder Assembly g. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Ladder removed (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Tool Kit, Blind Rivet (Item 43, Appendix C) Drill, Portable Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Sealing Compound (Item 59, Appendix D) Lockwasher (4) (Item 83, Appendix G) Lockwasher (3) (Item 941, Appendix G) Rivet, Blind (Item 219, Appendix G) Rivet, Blind (Item 225, Appendix G) Rivet, Blind (2) (Item 235, Appendix G) a. Ladder Mounting Bracket Removal. Remove four screws (1), lockwashers (2), and ladder mounting bracket (3) from van body (4). Discard lockwashers. b. Ladder Bracket Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply sealing compound to threads of four screws (1). (2) Install ladder mounting bracket (4) on van body (3) with four lockwashers (2) and screws (1). 16-184