TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 226 of 968
TM 9-2320-365-20-4 16-32. M1079 VENT COVER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). LH and RH doors opened (115 degrees) (TM 9- 2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Goggles, Industrial (Item 15, Appendix C) Tool Kit, Blind Rivet (Item 44, Appendix C) Materials/Parts Sealing Compound (Item 67, Appendix D) Rivet (4) (Item 232, Appendix G) Rivet (3) (Item 229, Appendix G) Rivet (3) (Item 231, Appendix G) Rivet (12) (frame) (Item 227, Appendix G) Seal (Item 244, Appendix G) Adhesive (Item 5, Appendix D) a. Removal. (1) Position vent cover (1) on stud base fastener (2). (2) Latch stud base fastener (2). WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. (3) Remove four rivets (3) from vent cover (1). (4) Unlatch stud base fastener (2). (5) Remove vent cover (1) and spacer (4) from van body wall (5). 16-178 Change 1