TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 222 of 968
TM 9-2320-365-20-4 16-30. M1079 DOOR SEAL AND RETAINER REPLACEMENT (CONT) b. Door Seal and Retainer Installation. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply sealing compound to door seal (1) and door jam (2). (2) Install door seal (1) on door jam (2). (3) Apply sealing compound to door seal retainer (3) and door jam (2). CAUTION Coat all rivets with sealing compound prior to installation. Failure to comply may result in damage to equipment. (4) Apply sealing compound to three rivets (4). (5) Install door seal retainer (3) on door jam (2) with three rivets (4). c. Latch Striker Removal. NOTE Top and bottom latch strikers are removed the same way. Top latch striker shown. Remove two screws (1), lockwashers (2), latch striker (3) and shim (4) from van body wall (5). Discard lockwashers. 16-174