TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 221 of 968
TM 9-2320-365-20-4 16-30. M1079 DOOR SEAL, RETAINER, AND LATCH STRIKER REPLACEMENT This task covers: a. Door Seal and Retainer Removal b. Door Seal and Retainer Installation c. Latch Striker Removal d. Latch Striker Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). LH and RH doors opened (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Drill, Electric, Portable (Item 7, Appendix C) Drill Twist (Item 6, Appendix C) Tool Kit, Blind Rivet (Item 43, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Rivet, Blind (3) (Item 233, Appendix G) Sealing Compound (Item 67, Appendix D) Seal, Door (Item 250, Appendix G) Lockwasher (2) (Item 82, Appendix G) a. Door Seal and Retainer Removal. WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. NOTE Top and bottom door seal and retainer are removed the same way. Top door seal and retainer shown. (1) Remove three rivets (1) and door seal retainer (2) from door jam (3). (2) Remove door seal (4) from door jam (3). Discard door seal. (3) Remove sealing compound from door jam (3). 16-173