TM-9-2320-365-20-4 LMTV Unit Maintenance Manual M1078 Series - Volume 4 Download
Page 220 of 968
TM 9-2320-365-20-4 16-29. M1079 RUBBER BUMPER AND TEE LATCH REPLACEMENT (CONT) c. Tee Latch Removal. NOTE Left and right side tee latches are removed the same way. Left side shown. (1) Remove sealing compound from edges of tee latch (1) and heads of four screws (2). (2) Remove four screws (2), lockwashers (3), washers (4), and tee latch (1) from van body (5). Discard lockwashers. (3) Remove sealing compound from van body (5) and tee latch (1). d. Tee Latch Installation. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Left and right side tee latches are installed the same way. Left side shown. (1) Apply sealing compound on tee latch (1). (2) Install tee latch (1) on van body (5) with four washers (4), lockwashers (3), and screws (2). (3) Apply sealing compound on edges of tee latch (1) and heads of screws (2). End of Task. 16-172